English Lithurin Diamond pad system

Lithurin® Diamond pad

Advantages:
The Lithurin® treatment increases the wear resistance and density of the surface up to 20 times.
Calcium deposits from the concrete surface are removed.
Surface friction is minimized, which simplifies cleaning and counteracts wheel tracks from forklifts..

Treatment: HARD / SEAL 3.0 / PROTEC

Lithurin® HARD with LC Diamond Pad 800.
Lithurin® SEAL 3.0 with LC Diamond Pad 1500
Lithurin® PROTEC with LC Polish Pad 3000.
The Lithurin treatment should be left to dry before wet polishing
is carried out.

Conditions for new concrete surfaces

Machine-trowelled concrete surface.
Use only water and plastic for curing. Do not use shrinkage barrier.
Minimum concrete quality C30 / C37.
The floor should be cured for at least 7 days at a temperature of 15 - 20°C.
The floor should be cured for at least 14 days at a temperature of 10 - 15°C.
With lower concrete quality, curing time is extended.

Conditions for old concrete surfaces

Old concrete surfaces should be cleaned. Grind the surface with LC Diamond Pad 400 and water.
Soiled surfaces should be pre-treated with LimeWash.

Lithurin® HARD

Lithurin® Hard is an impregnating agent which increases the density and wear resistance of the concrete surface.
Apply a minimum of 0,15 - 0,20 litres/m2 Lithurin® HARD to the surface.
Apply Lithurin® HARD with a low-pressure sprayer or an LC Applicator to the surface.
Allow the material to react for about 15 min. Allow the surface to dry.
Polish/grind the surface with LC Diamond Pad 800 and water.
Thoroughly clean the surface with a combined scrubber-dryer machine and water. Make sure there is no residue left on the surface when Lithurin® seal 3.0 is applied.
A smooth silky surface should appear. Never dry polish.

Lithurin® DENS

Lithurin® DENS is an impregnating agent which densifies the concrete surface.
Apply 0.15 liters/m2 Lithurin® DENS on the surface.
Apply Lithurin® DENS with a low-pressure sprayer or an LC Applicator to the surface.
Allow the surface to dry. (NOTE! It is important surface is saturated at the first application.)
Polish/grind the surface with LC Diamond PAD D1500 and water.
Thoroughly clean the surface with a combined scrubber dryer machine and water. Make sure there is no residue left on the surface when Lithurin® PROTEC is applied.
A shiny surface will appear.
If a high gloss surface is required; - polish/grind the surface with LC Diamond PAD D3000 and water.
Thoroughly clean the surface with a combined scrubber dryer machine and water. Make sure there is no residue left on the
surface when Lithurin® PROTEC is applied
A high gloss surface will appear.
Never dry polish.

Lithurin SEAL 3.0

Lithurin® SEAL 3.0 is an impregnating agent which densifies the concrete surface.
Apply 0,12 - 0,15 litres/m2 Lithurin® SEAL 3.0 to the surface.
Apply Lithurin® SEAL 3.0 with a low-pressure sprayer or an LC Applicator to the surface.Allow the surface to dry.

NOTE: It is important that the surface is saturated on the first application.
Polish/grind the surface with LC Diamond Pad 1500 and water. Thoroughly clean the surface with a combined scrubber-dryer machine and water. Make sure there is no residue left on the surface when Lithurin® PROTEC is applied.
A high-gloss surface should appear. Never dry polish.

Lithurin® PROTEC

Lithurin® PROTEC is an impregnating agent which increases the stain protection of the concrete surface.

Apply 0,10–0,15 litres/m² Lithurin® PROTEC to the surface.
Apply Lithurin® PROTEC with a low-pressure sprayer or an LC applicator to the surface.
Mop off the surface with a fine mop.Ensure that the surface is saturated and that Lithurin® PROTEC is evenly distributed on the surface.

Remove excess material while it is still fluid. Make sure that all surplus material not absorbed by the floor is removed.
Allow the surface to dry. Polish the surface with LC Polish Pad 3000 and Concrete Soap mixed 1:10 with water. Alternatively polish the surface with LC Diamond Pad 3000 and water. Never dry polish.
Clean the surface carefully with a combined scrubber-dryer machine. Use Concrete Soap mixed 1:100 with water.

Lindec betongprodukter

ab lindec och mer om att DAMMBINDA / DAMMBINDNING  BETONGGOLV - LITHURIN   HÅRDBETONG HARDCONCRETE - HERKULIT. Ytbehandling  BEHANDLA Härda IMPREGNERA betonggolv använd Lithuring behandlingar. Herkulit Hårdbetong ger SLITSTYRKA. För bästa betonggolv använd Herkulit  Vi har BETONG maskiner GLÄTTARE ÅKGLÄTTARE GLÄTTARBLAD