English Lithurin Seal 3.0

Lithurin® SEAL 3.0

Lithurin® SEAL 3.0 is an impregnator which seals the concrete surface, i.e. makes the concrete surface denser. Lithurin SEAL 3.0 is water-based and does not change the concrete’s colour, penetrates deeper and reacts evenly in the concrete, which increases resistance to abrasion. The surface becomes a part of the structure with no cracking, flaking or scaling. A one-off application which facilitates cleaning and provides long-term protection. Lithurin® SEAL 3.0 is emissions tested: result (Indoor Air Comfort Gold).

Area of application
• Sealing of concrete surfaces indoors and outdoors.
• Used as dust binder/sealant in wet environments.
• Used as dust binder/sealant in products modified with plastic such as mortars.
• Densifies the surface prior to diamond polishing.

Environmental benefits Lithurin® SEAL 3.0
• Indoor Air Comfort Gold.
• Water-based.
• Odourless.

Benefits Lithurin® SEAL 3.0
• Improves protection against stains.
• Neutralises calcium deposits.
• Durable – a one-off application provides long-term protection.
• Fast drying time – dry after 60 minutes, at a temp. of +15-18°.
• Can be used on new or existing concrete.

Equipment needed
• Low-pressure sprayer.
• Fine mop ”Lindec mop”.

Requirements for treatment with Lithurin® SEAL 3.0
• Min. temp. of +5 °C on the concrete surface (equivalent to an air temp. of +10 °C)
• The surface must be free of contaminants
• In treatment of old floors, the surface must be grinded clean before application.

Instructions for Lithurin® SEAL 3.0 indoors
1. Apply with a low-pressure sprayer or LC applicator.
2. Lithurin® SEAL 3.0 must remain wet on the surface for at least 15 minutes before it is allowed to dry. At high temperatures; prewater the surface.
3. Ensure that the surface is saturated so that the material has time to react and penetrate the concrete surface, otherwise the surface can be patchy.
4. Mop off the surface with a fine mop.
5. Remove excess material while it is still fluid.
6. Be sure to include all excess material that the floor does not absorb.
7. To ensure that the concrete surface receives the right amount of material, the instructions above must be followed carefully.
8. Under certain conditions, e.g. low temperatures, strong wind etc., the absorption time is longer and at higher temperatures the absorption time is shorter. Instructions for Lithurin® SEAL 3.0 outdoors and indoors

1. Apply with a low-pressure sprayer.
2. Lithurin® SEAL 3.0 must remain wet on the surface for at least 15 minutes. At high temperatures; prewater the surface.
3. Ensure that the surface is saturated so that the material has time to react and penetrate the concrete surface. Otherwise the surface can become patchy.
4. Directly after the material has entered into the surface (before the surface has dried), rinse off the surface or alternatively clean the surface with a combi scouring machine/wet vacuum cleaner.

Consumption
• Machine trowelled surface: approx. 0,15 litres/m².
• Non-machine trowelled surface: approx. 0,2-0,4 litres/m².

Lindec betongprodukter

ab lindec och mer om att DAMMBINDA / DAMMBINDNING  BETONGGOLV - LITHURIN   HÅRDBETONG HARDCONCRETE - HERKULIT. Ytbehandling  BEHANDLA Härda IMPREGNERA betonggolv använd Lithuring behandlingar. Herkulit Hårdbetong ger SLITSTYRKA. För bästa betonggolv använd Herkulit  Vi har BETONG maskiner GLÄTTARE ÅKGLÄTTARE GLÄTTARBLAD